Hi Guys,

I thought I'd post this up here too for everyone else to see, and I haven't done a WC build in a while

Im Currently in the proecss of building up a new watercooled CoolerMaster Cosmos II Ultra. So i thought id share my build with you guys or anyone wanting to build their own watercooled CoolerMaster Cosmos II Ultra.


Build Spec
==================
Intel Core i7 3960X Sandy Bridge-E 3.30GHz 15MB 130W LGA2011
ASUS Rampage IV Extreme/BF3 Intel X79 DDR3 Quad Channel E-ATX PCI-E3.0
2 x Mushkin Redline Ridgeback 16GB (4x4GB) DDR3-1600 CL7
2 x Sapphire ATI Radeon HD7970 3GB GDDR5 PCI-E
Corsair AX1200 Gold Professional Series Modular power supply
Intel 520 Series 120GB 2.5" SATA3 6GB/s 34nm SSD
Western Digital Caviar Black 1TB 64MB Cache SATA III
ASUS BC-12B1ST 12X Blue-ray Combo
CoolerMaster Cosmos II Ultra Tower

Watercooling Spec
==================
EK Supreme HF Nickel + Acetal CPU Block
EK Multioption RES X2 - 250 Advanced Reservoir
EK CoolStream RAD-XT 360 Radiator
EK CoolStream RAD XTC 140 Radiator
2 x EK-FC7970 - Acetal+EN (Nickel) GPU Blocks
Laing D5 Vario 12V DC Pump
EK D5 X-TOP - Acetal G1/4 Rev .2
Bitspower Black Sparkle 3/8" Compression Fittings
Bitspower Black Sparkle Rotary 90-Degree Fittings
Bitspower Black Sparkle Rotary 45-Degree Fittings
Bitspower Matt Black Stop Fittings
Bitspower Matt Black Multi-Link Adapters
Tygon R-3603 Clear 3/8" ID 5/8" OD Tubing
EK-Ekoolant Blood RED (premix 1000mL)


The Build
==================
The hardware im using






This beast of a case :P






The best way to always start a big water cooling project is to always strip down the case as much as you can. as I have done below

that is gonna be one sexy looking rig!

man that case is beast as !

dat spec

man that case it tank for watercooling. Keep us updated sure will look mint az

Fappin' and F5'in'.

wish the computer shop I work for was rich. Can't wait to see the rest!

Will be keen to see this build. As I am tossing up between the Cosmos 2 and the TJ11 to replace my 800D

A fan on the mobo? Oh jeez, I thought those things were phased out decades ago.

should have the beginning of the WC shots up by tomorrow

Seems legit

HURRY THE **** UP RAZOR!!!!!

There

Missing stick of ram?

Lookin good Razorfoot, also nice setup at CL

Wicked build, that redline looks so good

I just jizzed.

One question: Why are the fans on the two 120mm rads at the front set as exhaust? I assume the fans on the top 480 rad are set as intake??

they are 140mm and my intakes will be on the side panel

id rather not have the radiator heat exhausing into the case

Ah yeah, makes sense. Forgot the case has side intakes. Are they filtered? I still think you guys should order tonnes of DEMCi Flex filters. They're not magic and filter every single microscopic spec of dust, but after having them for about 4 months now I can tell you you'll notice the huge difference.

Is it just an optical illusion or does that top GFX card have a bit of flex in it towards the end?
I know flex can be expected but its just looks like quite a bit.

am i missing something ?

480 supplies chilled love to the top gfx card, which has two tubes going out to the 2nd gfx card ?

That looks correct, yes.