Results 1 to 5 of 5

  1. Post
    #1

    Internal USB Headers

    Hi all,

    I have just purchased a Z390m Gaming Edge AC.

    Along side the motherboard I have a Corsair Lighting Node Pro and an H100i Platinum. Both of these require a USB connection.

    So I plugged each of their internal headers into the internal USB 2.0 headers as there appears to be two of them, however when both plugged in the H100i does not show at all while the Lighting Node Pro does show. Only upon disconnecting the Lighting Node Pro does the H100i begin to work again.

    Any suggestions or advice on why this might be happening?

    Have tried switching cables around.

  2. Post
    #2
    Software problem maybe, can you plug them into the external (back) usb slots?

  3. Post
    #3
    MrCake wrote:
    Software problem maybe, can you plug them into the external (back) usb slots?
    I guess I could but I would have to leave a portion of the case off or modify it slightly by drilling a hole into it.

  4. Post
    #4
    Oh nah, not permanent, just to see if it's the internal header playing up or software.

  5. Post
    #5
    Got a USB cable and ran it out the back of the case. Works fine. So must be something weird internally.

    Will call MSI I think.